MB-3 USER INSTRUCTION MANUAL
19
required to select
Telephone
then, follow by
Import External Data
command on the NTG 4 system screen after you have completed the manual
phonebook upload under OPP mode.
Notes on NTG 4’s phonebook management:
NTG 4 system stores all the phonebook entries in one place regardless of transfer methods or
phone paired. Once phonebook entries are transferred into NTG 4 system they can be viewed
and used even if the contacts do not belong to the phone that is in connection. This is different
to the NTG 1 and NTG 2 systems which only allows the phonebooks belong to the connected
phone to be viewed.
NTG 4 vehicles also have a standard Bluetooth built inside and this allows user to transfer
phonebook to the system under its own OPP mode. However, if you use this built-in function
NTG 4 does not allow user to delete the entire phonebook in one go whereas phonebook
transferred from MB-3 using the
Import
command on the NTG 4 regardless it is automatic
sync or manual upload user will be able to delete the entire phonebook in one go.
4.4 Phonebook Setting
The default phonebook sync function is set to
ON
position only temporary.
After the first phonebook transfer is done it will automatically switch the
automatic sync function to the
OFF
position
.
Therefore, if you wish to auto
sync your phonebook every time you re-enter your car or if you wish to
update the newly added contacts to the Comand system you will need to turn
this function to the
ON
position.
To enable/disable automatic phonebook sync:
1. Press the
middle key
[MENU]
to enter the menu.
2. Press the
right key
[
]
to select
[PHONEBOOK]
.
3. Press the
middle key
[SETUP]
to enter the phonebook
setting.
4. Press the
middle key
[ON]
/
[OFF]
to enable or disable
automatic phonebook sync function.
A2DP
FM3 106.1 MHz
FM> MENU
BLUETOOTH
SETUP
PHONEBOOK
SETUP
PHONEBOOK
Counts: 201
SYNC: ON
OFF
PHONEBOOK
Counts: 201
SYNC: OFF
ON
