Viscount UNICO 700, Руководство пользователя

Страница: 23 / 104

21
Viscount
UNICO 700
User Guide
which means that the external panning (see par- 9.1) of certain stops might be modified automatically.
Stops placed between outputs [16] and [17], and/or outputs set as GENERAL or REVERB, will be
automatically set as Mono on the first output of the previously configured panning.
Press [EXIT] to abort the automatic panning adjustment and return to the SET-UP menu.
Press [ENTER] to confirm - the display will show:
Functioning of different modes is described in the tables below.
MODE OUTPUTS 1-16 OUTPUTS 17-18 OUTPUTS 19-20
TAB AMPLIFICAT.
[CONSOLE ON]
TAB AMPLIFICAT.
[EXT. SPEAKER ON]
STANDARD
As set in Ext. Router
Conf. function.
As set in Ext. Router
Conf. function.
As set in Ext. Router
Conf. function.
Internal amplification Outputs 1-20
GENERAL-REVERB
As set in Ext. Router
Conf. function.
General signal Reverberated signal only Outputs 1-16 Outputs 17-20
ANTIPHONAL
As set in Ext. Router
Conf. function.
As set in Ext. Router
Conf. function.
As set in Ext. Router
Conf. function.
Outputs 1-16 Outputs 17-20
GENERAL-ANTIPH.
As set in Ext. Router
Conf. function.
General signal
As set in Ext. Router
Conf. function.
Outputs 1-16 Outputs 17-20
ANTIPH.-REVERB
As set in Ext. Router
Conf. function.
As set in Ext. Router
Conf. function.
Reverberated signal only Outputs 1-16 Outputs 17-20
9.2 CONFIGURING THE AUDIO OUTPUTS ON THE REAR
(EXT. OUT CONFIG function)
Thanks to this function, the PROGRAMMABLE OUTPUTS can be configured, so as to manage the
Antiphonal signal (controlled through the AMPLIFICATION tabs), the general signal or just the reverberated
signal of the instrument.
Select the EXT. OUT CONFIG. field under the SET-UP menu; this pop-up message will appear: