Viscount Canticus I-II, Руководство пользователя

Страница: 36 / 94

Viscount CANTICUS I - II
34
1.3 RIGHT-HAND PANEL CONTROLS
5. Manual II section: The stops in this section are used to build up
the sounds required on the second manual.
6. Pedal section: This section contains the pedal stops.
7. Led Meter: This section contains one bar of LEDs which display
the Crescendo step (Canticus II only).
1.4 CONTROLS ON THE MANUALS (CANTICUS II only)
8. Set button (S): This button is used to activate the memory save function. See chapter 2 for further information.
9. Memory (HR; 1 - 2 - 3 - 4 - 5 - 6): All register settings made can be saved in six general memories. See chapter 2 for
memory programming. Memories include push-buttons marked HR. Also known as 0, the HR memory memorize
temporarely the last configuration present at time when the piston was switched on.
10. Enclosed (ENC): After this button has been pressed, the third manual expression pedal can be used to control the
general volume of the entire organ.
11. Automatic Pedal button (A.P.): The A.P. button allows the pedal keyboard registers to be played on the first keys of
the first manual. These registers become monophonic, with priority on the first note on the left.
C a n ticu s I C a n ticu s II
5
6
6 7
5
9
8
10 11 12 13
8 8