ViscoTec PreeFlow eco-CONTROL EC200 DUO, Инструкция по эксплуатации и техническому обслуживанию

Страница: 27 / 44

Dosing system eco-CONTROL EC200 DUO
Operating and maintenance instructions
Copyright © Version 1.4 27 / 43
5.11 Creating dosing programs
Only possible when using a memory card, a diskette symbol appears in the display at the
lower right. If there is no memory card, then only program 00 (volatile memory) is
available.
The creation of a dosing program is done as part of the Save function by inputting a
dosing program number.
• Select the dosing program (e.g. quantity program).
• Set the values (quantity, flow rate, sucking back).
• Save and input a dosing program number.
Use a memory slot that is still free so that no existing data is overwritten.
All the setting options for this dosing program are now available for editing. Do this as
described below under 5.14.
5.12 Selecting the dosing program
Only possible if using a memory card. If there is no memory card, then only program 00
(volatile memory) is available.
Press the Esc key to quit the menu.
The volume is set with the NAVI wheel and confirmed with the Enter key.
All the values that are set here are saved permanently in the Dosing system.
Notice:
The overcurrent monitoring is set permanently to ON.
The primary pressure and level monitoring functions protect the dispenser. This
effectively prevents any damage due to running dry if there is too little medium.
(Connection for the level signal, see 5.2, Connections, page 11)
Error message memory card
If the memory card is defective or has not been inserted,
when the Dosing system is switched on a corresponding
message (display 37) is shown for 3 seconds.
Di
sp
la
y 3
7
• Press PRG , system selection menu ,
display 2 appears.
• Select Programs , display 26.5 appears.
Display 2
Can’t find memory card.
10 47h
Fr 18.03.11
V1.00/1002/205G
Calibration auto
Calibration manuell
Service
Flush manually A
Flush manually B
Administration
Programs
10 47h
Fr 18.03.11