Page 7 of 8
DE6270_V10
APPENDIX - A
AXS-10 Programming Quick Reference Guide
Insert duration time
(seconds).
Example: For 35 seconds, press “10” three times
and press “1” five times (the display will show 35).
Present master key
to save the unlock time
.
Press
MODE
several times until
SPECIAL LED lights and “UL” is displayed.
Enter
installer password
(or factory defined installer
password F1, F2, F3, F1, F2, F3). The ADD LED start flashing.
Setting Door Unlock Duration
Press
Mode
Erasing all User Keys by Installer
Present master key
to the internal
reader, until the display blanks out and the yellow
LED lights constantly and then remove the key
Press
Mode
several times until SPECIAL
LED starts blinking and “Er” is displayed.
Enter
installer password
(or factory defined installer
password F1, F2, F3, F1, F2, F3). The green ADD LED flashes.
Press
Mode
Note: A master user key should be assigned before erasing user keys
Note: The ERASE ALL function does NOT erase the master key
Present master key
until ADD LED flashes.
Press
Mode
twice until SPECIAL LED lights
Present master key
to the internal reader, until the display
blanks out and yellow LED lights constantly and then remove the key
Type
4 step password
.
Verify that “Er” is displayed.
Erasing All User Keys by the User
Press
Mode
Present tag
(until the SPECIAL LED stops flashing)
Press
MODE
several times until
“SO”
is displayed
Enter
installer password
(or factory defined installer
password F1, F2, F3, F1, F2, F3). The ADD LED flashes.
Master Key Programming
Press
Mode
(Refer to the installation instructions document, par. 5.5)
replacing Installer Password
/
Setting
Present master key
until ADD LED flashes.
Enter 4-step
user password
(factory
default F3, F3, F3, F3). The display shows “Er”
Press
Mode
several times until SPECIAL LED lights
replacing User Password
/
Setting
Press
Mode
Press
Mode
several times until display shows “PP”
Enter new user
4-step password
Present master key
until the green
and yellow LEDs light (to confirm the password).
Present master key
until ADD LED flashes
.
Present master key
or press “MODE” to confirm, until
the number disappears and
red LED flashes
Press
Mode
.
The DELETE LED starts flashing -
indicating that the system is ready to delete a key.
Present key
to internal
reader .The key number will
be displayed momentarily,
the display blank and the
red LED will flash
Enter key number
Press combination of 100/10/1 buttons
(the key number you wish to delete)
Deleting User Key
Press
Mode
Present a key
.
The key number is displayed for few seconds
and then the green LED starts to flash (ready for adding next key).
Present master key
until ADD LED flashes.
ding User Key
Ad
Press
Mode
