background image

AXS-10 
Single-Door Access Control System – Installation Guide 

 

 

Page 6 of 8

 

DE6327_V4.0   15.03.07 

 

W.E.E.E. Product Recycling Declaration

 

For  information regarding the recycling  of this product  you must contact the  company from which you orignially purchased it. 
If you are discarding this product and not returning it for repair then you must ensure that it is returned as identified by your 
supplier. This product is not to be thrown away with everyday waste. 
Directive 2002/96/EC Waste Electrical and Electronic Equipment.

 

 

 

 

Standards Compliance 

This device complies with the essential requirements and 
provisions of Directive 1999/5/EC of the European Parliament 
and of the Council of 9 March 1999 on radio and 
telecommunications terminal equipment. 
This device has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable 
protection against harmful interference in residential 
installations. This equipment generates; uses and can radiate 
radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio and television reception. However, there is 
no guarantee that interference will not occur in a particular 
installation. If this device does cause such interference, which 
can be verified by turning the device off and on, the user is 
encouraged to eliminate the interference by one or more of the 
following measures: 

ƒ

 

Re-orient or re-locate the receiving antenna. 

ƒ

 

Increase the distance between the device and the 
receiver. 

ƒ

 

Connect the device to an outlet on a circuit different from 
the one which supplies power to the receiver. 

ƒ

 

Consult the dealer or an experienced radio/TV technician. 

 

Product Warranty 

Visonic Technologies Ltd. (VT or the Company), and its affiliates, 
warrants its products (hereinafter referred to as "the Product”) to be free 
of defects in materials and workmanship under normal operating 
conditions and use for a period of one year from the date of shipment 
by VT. The Company’s obligations shall be limited within the warranty 
period, at its option, to repair or to replace the defective Product or any 
defective component or part thereof. To exercise this warranty, the 
product must be returned to the manufacturer freight prepaid and 
insured. 

This warranty does not apply to repairs or replacement caused by 
improper installation, Product misuse, failure to follow installation or 
operating instructions, alteration, abuse, accident, tampering, repair by 
anyone other than VT, external causes, and failure to perform required 
preventive maintenance. This warranty also does not apply to any 
products, accessories, or attachments used in conjunction with the 
Product, including batteries, which shall be covered solely by their own 
warranties, if any. VT shall not be liable for any damage or loss 
whatsoever, whether directly, indirectly, incidentally, consequentially or 
otherwise, resulting from a malfunction of the Product due to products, 
accessories, or attachments of others, including batteries, used in 
conjunction with the Product. 

VT MAKES NO EXPRESS WARRANTIES EXCEPT THOSE STATED IN 
THIS STATEMENT. VT DISCLAIMS ALL OTHER WARRANTIES, 
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. VT’S SOLE RESPONSIBILITY FOR 
WARRANTY CLAIMS IS LIMITED TO REPAIR OR TO REPLACE AS 
SET FORTH IN THIS STATEMENT. 

VT shall have no liability for any death, personal injury, property 
damage, or other loss whether direct, indirect, incidental, 
consequential, or otherwise, based on a claim that the Product failed to 
function. However, if VT is held liable, whether directly or indirectly, for 
any loss or damage arising under this limited warranty or otherwise, 
regardless of cause or origin 

 

VT's maximum liability shall be limited to the purchase price of the 
Product, which shall be fixed as liquidated damages and not as a 
penalty, and shall be the complete and exclusive liability of VT. 

VT shall not, under any circumstances whatsoever, be liable for any 
inaccuracy, error of judgment, default, or negligence of VT, its 
employees, officers, agents, or any other party, or of the purchaser or 
user, arising from any assistance or communication of any kind 
regarding the configuration, design, installation, or creation of security 
system involving the Product, that being the responsibility of the 
purchaser or user. 

If VT is unable to make such repair or replacement, VT’s entire liability 
shall be limited to the cost of a reasonable substitute product. VT shall 
not be responsible for any dismantling, installation, reinstallation, 
purchasing, shipping, insurance, or any similar charges. 

VT shall have no liability for any damages, including without limitation, 
any direct, indirect, incidental, special, or consequential damages, 
expenses, costs, profits, lost savings or earnings, or other damages 
arising out of the use of the Product or the removal, installation, 
reinstallation, repair or replacement of the Product or any related 
events. In the event that there is any liability against VT, such liability 
shall be limited to the purchase price of the Product which amount shall 
be fixed as liquidated damages. 

The purchaser and user understand that this Product may be 
compromised or circumvented by intentional acts; that the Product will 
not in all cases prevent death, personal injury, property damage, or 
other loss resulting from burglary, robbery, fire or other causes; and that 
the Product will not in all cases provide adequate warning or protection. 
The purchaser and user also understand that a properly installed and 
maintained alarm may reduce the risk of events such as burglary, 
robbery, and fire without warning, but it is not insurance or a guarantee 
that such events will not occur or that there will be no death, personal 
injury, property damage, or other loss as a result of such events. 

By purchasing the Product, the purchaser and user shall defend, 
indemnify and hold VT, its officers, directors, affiliates, subsidiaries, 
agents, servants, employees, and authorized representatives harmless 
from and against any and all claims, suits, costs, damages, and 
judgments incurred, claimed, or sustained whether for death, personal 
injury, property damage, or otherwise, because of or in any way related 
to the configuration, design, installation, or creation of a security system 
involving the Product, and the use, sale, distribution, and installation of 
the Product, including payment of any and all attorney’s fees, costs, 
and expenses incurred as a result of any such events. 

The purchaser or user should follow the Product installation and 
operation instructions and test the Product and the entire system at 
least once each week. For various reasons, including but not limited to 
changes in environmental conditions, electric, electronic, or 
electromagnetic disruptions, and tampering, the Product may not 
perform as expected. The purchaser and user are advised to take all 
necessary precautions for the protection and safety of persons and 
property. 

This statement provides certain legal rights. Other rights may vary  
by state or country. Under certain circumstances, some states or 
countries may not allow exclusion or limitation of incidental or 
consequential damages or implied warranties, so the above exclusions 
may not apply under those circumstances and in those states or 
countries. 

VT reserves the right to modify this statement at any time, in its sole 
discretion without notice to any purchaser or user. However, this 
statement shall not be modified or varied except by VT in writing, and 
VT does not authorize any single individual to act on its behalf to modify 
or vary this statement.  

Any questions about this statement should be directed to VT.   3/07 

 

 

VT World Headquarters

 * Tel Aviv, Israel * Tel: + 972 3 768-1400 * [email protected] 

 

VT Americas

 * Bloomfield, CT (USA) * Tel: 1-860-243-0833 or 1-860-243-0020 * [email protected] 

 

VT Technologies

 * Beckenham Kent BR3 90BF, England * Tel: + 44-870-730-0840 * vtuk_support@ visonictech.com 

 

Visonic GmbH

 * D-40215 Düsseldorf, Germany * Tel: + 49-0-211-600-696-0 * support@ visonictech.de

 

 

Manufactured In Israel 

 

Additional information may be found at www.VT-Partners.com 

 

 

 

 

Содержание AXS-10









Отзывы: