Virtuos BT310D, Руководство пользователя

Страница: 9 / 42

Start Configuration((+SETF))
End Configuration((+ENDF))
9
For the following part of the codes (pages 7-36), you must
first read the
Start Configuration code in the page header,
then the configuration code(s) and finally the End
Configuration code in the page footer.
Chap.1 System Information
Set All default((+RETF))
Do not change the settings in
the previous chapters !
S/W Version((+SFUR))
2.1Message Terminator
None((+C9A))
<CR>((+C9C))
TAB((+C9E))
CR+LF((+C9B))
LF((+C9D))
2.2 Character Installation
The preamble and postamble character: You can put 10
ASCII at most in front of the barcode data. When the
installation is
“ 0 ” that means you don ’ t need to add the
first and last character. Please find the format as below:
Preamble Character Barcode Postamble Character
The process for adding the first and last character to the
barcode:
1.
Scan the barcode of “ Start Configuration ” and “ The
Preamble Character Installation ” .
2. Check the ASCII table to get the ASCII code of the
first and last character.