5
EN
VirtuFit Etappe 1 Spinbike
STEP 1
:
ASSEMBLY INSTRUCTIONS
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the spinbike. Some parts (bolts, screws, etc.) are already attached to / in the spinbike.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your spinbike? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The spinbike contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
NOTE:
Make sure you have enough space around the appliance before you start mounting. Check that
all necessary parts are present and use the available tools to install the appliance.
• Attach the Front Stabilizer (pt.15) to the Main Frame (16) using two sets of Ø8 Flat Washers (5), M8
Domed Nut (6) and M8*52 Carriage bolt (3).
• Attach the Rear Stabilizer (4) to the Main Frame (16) using two sets of Ø8 Flat Washers (5), M8 Domed
Nut (6) and M8*52 Carriage bolt (3).
• Then fix the bottle holder (9) to the main frame with 2 PCS screw3 (43), put the Bottle (32) to the
bottle holder (9)
