TQ6+ | User's manual
3
3. CONTROLS
4. CALIBRATION ON WINDOWS
Adjusting the lever’s hardness
If you want you can adjust the lever’s hardness tightening the wheels (K &
J) located on the left and the right sides of the device.
Once you have adjusted the knob, move the 2 or 4 levers (all the way at
the same time, from top to bottom, at least 10 times). This operation is
necessary to distribute adequately the same strength in the 2 or 4 levers.
It is not necessary the calibration on windows because the
device is calibrated from factory but you can use the calibra-
tion Windows tab to test the device.
K
J