3: Configuring the
Configuring a GSM (3G) modem on a GW2040 Series Router
© Virtual Access Ltd.
Issue: 1.5
Page 7 of 34
3
Configuring the GW2040 series
The GW2040 Series contains an internal web server that is used to configure the router.
Before you can access the internal web server and start the configuration, you must
ensure that your PC has the correct networking set up.
When your GW2040 Series router is correctly connected to your PC, type fast.start into
the URL line of your browser to display the start page. Alternatively, you can type in the
IP address of the gateway.
Figure 3: The GW2040 series web interface start page
If a login page appears type in the login password you received from your administrator.
If you have not received a password, contact the Virtual Access Support team.
Access the Fast Start Wizard by clicking the Fast.Start icon on the start page of the
embedded web.
The Fast Start Wizard will guide you through a series of forms that you must complete to
configure your GW2040 Series router.
