virtual access GW2040 Series, Настройка

Страница: 26 / 34

4: Setting up the GSM (3G) modem for a primary WAN link
Configuring a GSM (3G) modem on a GW2040 Series Router © Virtual Access Ltd.
Issue: 1.5 Page 26 of 34
To set the appropriate country code, type in boot initialised string using the country code
shown in Table 12.
Use ; (semi-colon) to separate multiple commands.
Field name Description Command line
Enabled Specifies if the modem interface is enabled.
Set Enabled to
yes .
Set Modem Interface
Enabled
Boot Initialisation
String Defines an initialisation string that is sent to
the modem on boot.
US value Default
UK value at+gci=B4;
Japan
value at+gci=00;
Multiple
command
example at+gci=B4;+vcid=1;v0w2e0
Set Modem Interface
Boot Initialization
String
Full Duplex Enabled or disable full duplex on modem.
Set Modem Interface
Fullduplex Enabled
Tone Dial Enabled Enables or disable dial tone.
Set Modem Interface
Tone Dial Enabled
Table 12: The modem interface on modem-0 fields, their descriptions and command lines
Click Update . The Configuration Update Result page appears.
4.2.11 Save the configuration
In the Configuration Update Result page, click Save to flash .
Figure 21: The configuration update results page
The Save Configuration to Flash page appears.