4: Setting up the GSM (3G) modem for a primary WAN link
Configuring a GSM (3G) modem on a GW2040 Series Router
© Virtual Access Ltd.
Issue: 1.5
Page 11 of 34
Figure 7: The IP default routes entry page
Field name
Description
Command line
Configured
Enables or disables the default route.
Set Configured to
Yes
Set Ip Route Default
Configured
Route Type
Indicates whether the route type is
over a numbered or unnumbered
link. A numbered link is a link that
has been assigned an IP address.
Set Route Type to
unnumbered
.
Ip Route Default Indexed
Numbered
Numbered Route
Next Hop IP
If you have set Route Type to
numbered, enter the IP address, in
dotted-decimal notation, of an
adjacent router to which to send
traffic when a route to a destination
is not known by the local device.
Ip Route Default Indexed
Next Hop Ip
Unnumbered Route
Next Hop Interface
If you have set Route Type to
unnumbered, select the interface
that provides a connection to the
next hop router. Set the Next Hop
Interface to one of the options from
the drop down list.
Ip Route Default Indexed
Next Hop Interface
Metric
Defines the RIP metric for the route.
Minimum
Value
1
Default
1
Ip Route Default Indexed
Metric
