4: Setting up the GSM (3G) modem for a primary WAN link
Configuring a GSM (3G) modem on a GW2040 Series Router
© Virtual Access Ltd.
Issue: 1.5
Page 24 of 34
4.2.9
Set dialling options for GSM only
In the Expert View menu, select
interfaces -> ppp-2 -> call control -> call
. The Call
Details page appears.
Figure 19: The call details on ppp-2 page
Field name
Configuration
Command line
Outgoing Call
Destination
Number
Enter the ISP number to call to
establish a connection to the Internet.
Normally,*99# string is valid. Check
with your ISP to confirm.
Set Dial Neighbour
Originate Address
Outgoing Call
Destination
Subaddress
Specifies the device’s subaddress, or
extension, if the call destination device
has a subaddress defined. No spaces
are allowed.
Set Dial Neighbour
Originate Subaddress
Incoming Call
Remote Number
Specifies the number of one of the
locations that is allowed to place calls
on this interface. No spaces are
allowed.
Set Dial Neighbour Answer
Address
Incoming Call
Local Number
Specifies the device’s local subaddress,
or extension, if the call source has a
subaddress defined. No spaces are
allowed.
Set Dial Neighbour
Received Called Address
ISDN Call Type
If using ISDN, defines the call type.
Set Dial Neighbour Call
Type
Permissions
Assigns the dial permissions to call,
answer, call and answer, call back, or
CLI auto answer.
Set Dial Neighbour
Permission
Auto Connect
Enabled
Allows the GSM (3G) modem to bring
up the link automatically when the
GW2040 is restarted.
Set Dial Neighbour Call
Autoconnect
