Install manual: Viridian EV EcoLite
®
Basic charge point
Iss 3 - Apr 2019
Page 12 of 15
Annex 2: EcoLite LED Brightness and SLS Configuration
WARNING
This is not user configurable and must be set by a qualified electrician / installer as it requires isolating power to
the unit and removing the enclosure lid.
SLS will only operate when positions 3 & 4 of DIP-switch SW3 (Fig. C – 7) on both EcoLites are set to
the same, as per below table.
Should there be a requirement to change the brightness of the status indicator LEDs, or to turn off the
halo completely, then set the brightness configuration DIP switches SW3 (Fig. C – 7) as per the settings
in the below table.
X = Irrelevant / does not matter
1
2
3
4
Brightness
SLS
OFF
OFF
X
X
MAX
X
OFF
ON
X
X
MEDIUM
X
ON
OFF
X
X
LOW
X
ON
ON
X
X
HALO OFF
X
X
X
ON
ON
X
SLS OFF
X
X
OFF
ON
X
SLS ON
