Vircell 30006590, Руководство пользователя

Страница: 28 / 50

Operator’s Manual
Operating Procedure
28/50
Insert the Username and Password and press Log In to access to the Start Page:
There are two ways for initializing VirClia Lotus: Start with Clean or Start Working.
By pressing the Start with clean button the Instrument will execute its initialization procedure that includes:
•
Clean of the hydraulic circuit of VirClia Lotus.
•
The Reset of all the Moving parts to their Home positions.
•
The Strip Rotor and Reaction Rotor checks to detect the presence and position of all the Strip Holders and
find the empty position.
•
The hydraulics priming to properly fill all the tubing, dilutors, pumps and needles.
By pressing Start Working, VirClia Lotus will perform the same procedure without the clean of the hydraulic circuit
with DI water.
The status of the Waste Tank level, Wash Buffer Tank Level and Distilled Water Tank level are shown.
Once the initialization is complete the instrument will be ready for the analysis execution. And the Running Screen will
appear.
Refer to paragraph 3.3.1 for the instructions to load the Wash Buffer and the Distilled Water, and to empty the Strip
Waste container and the Waste
Tank if needed.
3.3.3. R
UNNING
S
CREEN