Installation
It is recommended that installation be completed by a
licensed electrician.
1. Locate and turn off the circuit breaker for the light you
want to control with the dimmer.
2. Check that the wires in the device box where you are
installing the dimmer are de-energized. Note: some wires
may be connected to different circuit breakers.
3. Identify the wires in the device box leading to the dimmer
you want to replace (see diagram).
Typical wiring - note that not all wiring will look like this.
Ground wires are often bare copper, but are shown as
green here for clarity.
G
R
O
U
N
D
To Light
From Panel
E
N
I
L
LO
AD
5
