LOAD
NEUTRAL
LINE
GROUND
Installation Continued
It is recommended that installation be completed by a
licensed electrician.
4. Disconnect the wires from the existing dimmer, making
sure to remember which wire is which (labeling the wires
with tape before disconnecting them can be useful).
5. Using the existing and/or supplied wire nuts, connect the
wires of your new dimmer as appropriate to your wiring
configuration (see diagram).
Typical wiring - note that not all wiring will look like this.
G
R
O
U
N
D
To Light
From Panel
6. Bend the wires into the device box, taking care to not
loosen the wire nuts. Push the dimmer into the box and
attach it using the screws provided.
LINE
LO
AD
6
