Installation Continued
13. If you will be using a hub to control your dimmer, ensure
that the Hub Address is correct and that the Hub Support
and mDNS checkboxes are enabled.
14. If you are configuring multiple dimmers at the same
time, click
Identify Device
, and the dimmer will turn on
and off five times allowing you to easily locate it.
15. Give your dimmer a unique Device Name.
16. Click
Save
. The dimmer will restart and connect to your
WiFi network. The WiFi Connection will be lit solid green
once connected.
17. The built-in web page of your dimmer should now be
accessible at: http://device_name.local (spaces in the
Device Name are replaced with underscores ( _ ) and
capital letters changed to lower case).
18. Configure your home automation hub to connect to
the dimmer using MQTT (your hub provider should offer
instructions, or refer to the Virage website).
19. You can modify the MQTT settings on your dimmer
from the Configuration menu on the web interface.
The default MQTT username and password are:
username: mqttuser
password: mqttpass
9
