background image

Manufacturer’s Warranty

13

Section 6

Manufacturer’s Warranty

Our Commitment

VIQUA is committed to ensuring your experience with our products and organization exceeds your expectations. We have 

manufactured your UV system to the highest quality standards and value you as our customer. Should you need any 

support, or have questions about your system, please contact our Technical Support team at 1.800.265.7246 or 

[email protected]

 and we will be happy to assist you. 

How to Make a Warranty Claim

Note: 

To maximise the performance and reliability of your VIQUA product, the system must be properly sized, installed and 

maintained. Guidance on the necessary water quality parameters and maintenance requirements can be found in 

your Owner’s Manual. 

In the event that repair or replacement of parts covered by this warranty are required, the process will be handled by your 

dealer. If you are unsure whether an equipment problem or failure is covered by warranty, contact our Technical Support 

team at 1.800.265.7246 or e-mail 

[email protected]

. Our fully trained technicians will help you troubleshoot the 

problem and identify a solution. Please have available the model number (system type), the date of purchase, the name of 

the dealer from whom you purchased your VIQUA product (“the source dealer”), as well as a description of the problem 

you are experiencing. To establish proof of purchase when making a warranty claim, you will either need your original 

invoice, or have previously completed and returned your product registration card via mail or online.

Specific Warranty Coverage

Warranty coverage is specific to the VIQUA range of products. Warranty coverage is subject to the conditions and 

limitations outlined under “

General Conditions and Limitations

”.

Ten-Year Limited Warranty for VIQUA UV Chamber

VIQUA warrants the UV chamber on the VIQUA product to be free from defects in material and workmanship for a period of 

ten (10) years from the date of purchase. During this time, VIQUA will repair or replace, at its option, any defective VIQUA 

UV chamber. Please return the defective part to your dealer who will process your claim.

Three-Year Limited Warranty for Electrical and Hardware Components

VIQUA warrants the electrical (controller) and hardware components to be free from defects in material and workmanship 

for a period of three (3) years from the date of purchase. During this time, VIQUA will repair or replace, at its option, any 

defective parts covered by the warranty. Please return the defective part to your dealer who will process your claim.

One-Year Limited Warranty for UV lamps, Sleeves, and UV Sensors

VIQUA warrants UV lamps, sleeves, and UV Sensors to be free from defects in material and workmanship for a period of 

one (1) year from the date of purchase. During this time, VIQUA will repair or replace, at its option, any defective parts 

covered by the warranty.Your dealer will process your claim and advise whether the defective item needs to be returned for 

failure analysis.

Note: 

Use only genuine VIQUA replacement lamps and sleeves in your system. Failure to do so may seriously 

compromise the performance and affect warranty coverage.

General Conditions and Limitations

None of the above warranties cover damage caused by improper use or maintenance, accidents, acts of God or minor 

scratches or imperfections that do not materially impair the operation of the product. The warranties also do not cover 

products that are not installed as outlined in the applicable Owner’s Manual.
Parts repaired or replaced under these warranties will be covered under warranty up to the end of the warranty period 

applicable to the original part.
The above warranties do not include the cost of shipping and handling of returned items.The limited warranties described 

above are the only warranties applicable to the VIQUA range of products. These limited warranties outline the exclusive 

remedy for all claims based on a failure of or defect in any of these products, whether the claim is based on contract, tort 

(including negligence), strict liability or otherwise. These warranties are in lieu of all other warranties whether written, oral, 

implied or statutory. Without limitation, no warranty of merchantability or of fitness for a particular purpose shall apply to any 

of these products.
VIQUA does not assume any liability for personal injury or property damage caused by the use or misuse of any of the 

above products. VIQUA shall not in any event be liable for special, incidental, indirect or consequential damages. VIQUA’s 

liability shall, in all instances, be limited to repair or replacement of the defective product or part and this liability will 

terminate upon expiration of the applicable warranty period.

Содержание VT1















Отзывы: