22
23
21
1
2
Ensure
sleeve bolt
is fully
rotated until
positive
stop.
Do not touch
glass with
bare hands.
Insert curved
end of
sleeve first.
Do not rotate
sleeve.
Wet O-ring
with water
then place
over top end
of sleeve.
24
1
2
25
26
1
2
Ensure
sleeve
bolt is
fully
rotated
until
positive
stop.
Wet O-ring
with water
then place over
bottom end of
sleeve.
27
28
29
Re-install
current lamp if
it does not need
replacement. Be
sure to rotate
lamp completely.
Do not touch
glass with bare
hands.
1
2
30
31
32
33
34
If lamp was replaced:
Press and hold "New Lamp"
button for 5 seconds until
you hear a "beep".
35
Disinfect the water lines.
UV systems disinfect the water using
ultraviolet light, treating the water as
it passes through the system. When
there is a risk that water downstream
of the UV system has been
contaminated it is critical that these
water lines be chemically disinfected.
36
37
38
39
40
41
Lock wire
form into
position.
Skip to
Step 31
if not
equipped with
a sensor.
3
Install
screw (if
equipped).
Unplug sensor from blue jack.
