About sleeve cleaning:
Minerals in the water slowly form a coating on the sleeve. This coating must be removed because it
reduces the amount of UV light reaching the water, thereby reducing disinfection performance.
About lamp replacement:
The amount of UV light created by the lamp decreases over time, requiring that the lamp be
replaced. The system will automatically notify you when it is time to replace the lamp (the lamp
should last approximately 24 months).
Equipment required:
Cloth must be
soft, lint-free, and
chemical-free. No
clean-wipes.
Scale remover
such as CLR
TM
or
Lime-Away
TM
.
#2 Phillips
screw driver
Cotton swab.
Clean cotton,
latex or plastic
gloves are
preferred.
Part
Lamp
Sleeve
Length
UVMAX G & Pro10
602854
602974
15.1“
UVMAX H & Pro20
602855
602975
26.7“
UVMAX J, K & Pro30, Pro50
602856
602976
36.5“
