Viper FANG 18 C, Руководство пользователя

Страница: 7 / 31

ENGLISH
8 FANG 18 C
Warranty
Our general conditions of business are applicable with
regard to the guarantee.
Unauthorised modifications to the appliance, the use of
incorrect brushes in addition to using the appliance in
a way other than for the intended purpose exempt the
manufacturer from any liability for the resulting dam-
age.
Tests and approvals
Electrical tests must be performed in accordance with
the provisions of safety regulations (BGV A3) and to
DIN VDE 0701 Part 1 and Part 3. In accordance with
DIN VDE 0702 these tests must be performed at regu-
lar intervals and after repairs or modifications.
Risks
DANGER
Do not wear jewels when working near electrical com-
ponents.
Do not work under the lifted machine without support-
ing it with safety stands.
Do not operate the machine near toxic, dangerous,
flammable and/or explosive powders, liquids or va-
pours.
WARNING
If the machine is not working as it should, has been
damaged, left outdoors or dropped into water, return it
to the Service Center.
To reduce the risk of fire, electric shock, or injury, do
not leave the machine unattended when it is plugged
in.
Always protect the machine against the sun, rain and
bad weather, both under operation and inactivity condi-
tion. Store the machine indoors.
Do not allow to be used as a toy. Close attention is
necessary when used near children.
Take all necessary precautions to prevent hair, jewels
and loose clothes from being caught by the machine
moving parts.
Do not leave the machine unattended without being
sure that it cannot move independently.
Do not use the machine in particularly dusty areas.
While using this machine, take care not to cause dam-
age to people or objects.
Do not bump into shelves or scaffoldings, especially
where there is a risk of falling objects.
Do not put any can containing fluids on the machine.
The machine working temperature must be between
0°C and +40°C.
The machine storage temperature must be between
0°C and +40°C.
The humidity must be between 30% and 95%.
Do not use the machine as a means of transport.
Do not use the machine on slopes with an inclination
higher than 2%.
Do not allow the brushes to operate while the machine
is stationary to avoid damaging the floor.
In case of fire, use a powder fire extinguisher, not a
water one.
Do not tamper with the machine safety guards and
follow the ordinary maintenance instructions scrupu-
lously.
Do not allow any object to enter into the openings. Do
not use the machine if the openings are clogged. Al-
ways keep the openings free from dust, hairs and any
other foreign material which could reduce the air flow.
Do not remove or modify the plates affixed to the ma-
chine.
If the machine is used according to the instructions, the
vibrations are not dangerous. The machine vibration
level is less than 2.5 m/s²:
This machine cannot be used on roads or public
streets.
Pay attention during machine transportation when tem-
perature is below freezing point. The water in the re-
covery tank or in the hoses could freeze and seriously
damage the machine.
In case of machine malfunctions, ensure that these are
not due to lack of maintenance. If necessary, request
assistance from the authorised personnel or from an
authorised Service Center.
To ensure machine proper and safe operation, the
scheduled maintenance shown in the relevant chapter
of this Manual, must be performed by the authorised
personnel or by an authorised Service Center.
Carefully read all the instructions before performing
any maintenance/repair procedure.
Do not wash the machine with direct or pressurised
water jets, or with corrosive substances.
Spare parts and accessories
CAUTION
Spare parts and accessories.