7
© 2012 Directed. All rights reserved.
Using your system
Active arming
You can activate or arm the system by pressing
for one second.
When the system arms you will hear a short siren sound or chirp, and
the parking lights flash once. If the vehicle’s power door locks have
been connected to the system, the doors lock.
While the system is armed the status LED flashes once per second,
indicating that the system is active and protecting your vehicle. If you
hear a second chirp after arming and see the status LED flashing in
groups, refer to the Diagnostics section of this guide. This extra chirp
is called Bypass Notifification.
Passive arming
The system can be programmed to arm itself automatically, this is
called passive arming. If the system is programmed for passive arm-
ing, it will automatically arm 30 seconds after the ignition is turned
off and the system detects that you have left the vehicle by opening
and closing a door. Whenever the system is in its 30-second passive-
arming countdown, the status LED flashes twice as fast as it does
when the system is armed. The siren chirps one time 20-seconds after
the last door has been closed to indicate that the system is about to
arm. At the 30-second point the parking lights flash to indicate that
the system is armed.
If any protected entry point (such as a door or a switch-protected trunk
or hood) is open, the system will not passively arm (unless forced pas-
sive arming is programmed on. See Programming Options section of
this guide.) Additionally, if a door, hood or trunk is triggered during the
arming countdown, the 30-second countdown starts over.
