connector
for
output
module
connector
for
cutter
assembly
b
b
a
a
Printer Maintenance
49
Figure
6
Connectors
and
cables
on
left
side
of
clamshell
5. Use a T10 Torx driver to remove the four screws securing the output module.
Remove the outer screws (a) first.
6. Carefully remove the output module from the clamshell.
There is a black cable looped across the bottom of the output module. Gently pull
the cable away from the bottom corners of the output module and ease the output
module out.
The cutter assembly is now visible (
Figure 7
).
