VIPA TM-E 900-1E650, Руководство пользователя

Страница: 63 / 78

Manual VIPA TM-E
Chapter 4 Deployment TM-E
HB39E - TME - RE_900-1E650 - Rev. 09/11 3-35
So that your TM-E module may transfer every IP packages received from
the PPP connection to the PLC, you have to configure
Forwarding
.
•
Navigate to the page "Communication" via
Configuration
>
System
Setup.
Open in the Navigation tree
Network Configuration
the page
"Routing".
•
Activate the option "Enable IP forwarding between IP interfaces" and
click at [Update].
Since your PC is connected to the TM-E module via telephone, your TM-E
module is automatically set as gateway in your PC. Here in you PC no
further settings are necessary.
To get access to your via Ethernet connected PLC, in your PLC
respectively network device you have to set the IP address of your TM-E
module as gateway.
For this open in NetPro the properties dialog of your Ethernet part and
enter as gateway the IP address of your TM-E module.
If you have just established the teleservice via telephone, the callback
function in your TM-E module may now be used.
By means of a call (defined numbers of ring signals) your TM-E module
may be activated to send an eMail. In the eMail among others an IP
address may be found as link.
As long as your TM-E module is online, it may be accessed via this link.
More about this may be found at "Teleservice via Callback function".
Configure
forwarding
Configure TM-E as
gateway
Callback-Function