VIPA TM-E 900-1E650, Руководство пользователя

Страница: 59 / 78

Manual VIPA TM-E
Chapter 4 Deployment TM-E
HB39E - TME - RE_900-1E650 - Rev. 09/11 3-31
Information how to integrate your TM-E modules to your PLC may be found
at "TM-E - Project integration - PG/PC interface".
If you have just integrated your TM-E module into your PLC project, at the
TM-E station of NetPro the routing is accordingly be adapted.
•
Open NetPro with your project.
•
Open the properties dialog of the communication component
"IE General" of the station "TM-E".
•
Click at "Interface" at [Properties]. A dialog window for presetting the IP
address data is opened.
For the access via PPP dial connection the following predefined IP address
data are to be used:
IP address: 202.0.0.240
Subnet mask: 255.255.255.0
Open the properties dialog of the communication component "MPI/DP" of
"TM-E". Enter the MPI address. This must be the same as the MPI address
configured with the software tool "eBuddy".
Please regard that your CPU is connected via MPI and the MPI address is
accordingly assigned. VIPA CPUs are delivered with MPI address 2.
Configure routing
in PLC project
Access defined by
IP address
Set MPI address