VIPA TM-E 900-1E650, Руководство пользователя

Страница: 26 / 78

Chapter 2 Hardware description
Manual VIPA TM-E
2-6 HB39E - TME - RE_900-1E650 - Rev. 09/11
A reset at the TM-E module may be initiated by the Reset button.
LI
N
E
The Reset button is allocated below the "Line" jack behind an opening.
Please use for operation a pointed object.
More about the deployment of the Reset button may be found at
"TM-E - Reset".
The TM-E module is to be power supplied by DC 12 ... 24V
±
20%. Here the
power consumption amounts to 3 ... 6W.
For power supply there is a 2-pin connector at the lower-side of the TM-E
module. The connector is a plug with screw contacts. If connected the
plugs may be fixed with screws. The connector has the following
assignment:
Pin Name Meaning
1 GND Ground power supply
1
2
2 12-24V DC DC 12 ... 24V ±
20%
For the digital inputs/outputs there is a 5-pin connector at the low-side of
the TM-E module. The output is designed as low-side output and may
accordingly be configured.
The connector is a plug with screw contacts. If connected the plugs may be
fixed with screws.
Pin Name Meaning
Digital input/output
1 DO_GND DO ground
2 DO_OC Digital output DC 24V, 0.2A
Low-side output
3 DO_VDC DO load voltage DC 24V
4 DI_GND DI ground (isolated)
1
2
3
4
5
5 DI Digital input DC 0/24V
"0": 0 ... 5V
"1": 10 ... 30V
DO_GND 1
DC
24V
DO_OC 2
-
+
DO_VDC 3
DC
24V
+
-
DI_GND 4
DI 5
DC 24V
Output DO
Optocoupler
DO_GND
1
DO_OC
2
DO_VDC
3
+
-
Reset
Connector
power supply
Connector
digital I/O
Wiring diagram /
Schematic diagram