VIPA TM-E 900-1E650, Руководство пользователя

Страница: 47 / 78

Manual VIPA TM-E
Chapter 4 Deployment TM-E
HB39E - TME - RE_900-1E650 - Rev. 09/11 3-19
TM-E - Project integration - PG/PC interface
For the further approach it is precondition that you have access to the Web
page of the TM-E module and your CPU is connected to the TM-E module
via MPI and is accordingly configured.
For the project engineering, a thorough knowledge of the Siemens
SIMATIC manager and the hardware configurator from Siemens is re-
quired.
IP address and subnet mask of your PC are known.
With the teleservice the TM-E module works as gateway. As gateway via
the served communication connections you have access to the VIPA PLC,
which is connected via MPI to the TM-E module.
So that the TM-E module can work as gateway, you have to integrate this
to your hardware configuration.
For the deployment of the TM-E module in the Siemens SIMATIC manager,
the installation of the station file TM-E.cfg is necessary.
This file may be found in the download area at www.vipa.de.
Download this file to your PC. Later this file is to be imported to the PG/PC
interface.
Since in the TM-E module predefined IP address data for the PPP server
are used, in your project you have to de-activate the automatic address
assignment.
•
Start the Siemens SIMATIC manager with your project. Your project
should contain your CPU, which is connected via MPI to the MPI bus.
•
Open via
Options
> Set
PG/PC interface
the properties dialog.
•
Select the interface parameter assignment "TCP/IP(Auto)...", which
corresponds to your network card and click to [Properties].
•
Select the Register "IE-PG Access" and activate the parameter "Do not
assign IP address automatically".
•
Confirm your setting with [OK].
Precondition
Teleservice
Load TM-E.cfg
station file
De-activate the
automatic IP
address
assignment