VIPA TM-E 900-1E630, Руководство пользователя

Страница: 62 / 68

Chapter 3 Deployment
Manual VIPA TM-E
3-36 HB39E - TME - RE_900-1E630 - Rev. 09/11
•
To enter the SMTP server open the page "General" at "System setup".
•
Navigate at the navigation tree to
Net Services
>
SMTP (mails)
.
•
Here enter the following parameters:
- SMTP server address (may be an IP address or a domain)
- SMTP server port (default: 25)
- eMail address (valid eMail address)
-
User name
and
Password
may only be entered if secure authentication
was activated in the dial-up server configuration.
•
To activate the Callback open the page "Communication" at "System
setup.
•
Navigate in the navigation tree to
Network Config
>
Callback
.
•
Activate the option "Callback enabled".
•
Accept the default settings and click at [Update].
For a test call the telephone number of your TM-E module. Let it ring 5
times and then disconnect. After about 30 seconds the TM-E module
attempts now to dial-up to the Internet to establish a connection to the mail
server to send you an eMail.
The eMail contains an IP address. The TM-E module may now be
accessed by this address.
Configuration of
the mail server
Activation of the
Callback
Test the Callback