VIPA TM-E 900-1E630, Руководство пользователя

Страница: 36 / 68

Chapter 3 Deployment
Manual VIPA TM-E
3-10 HB39E - TME - RE_900-1E630 - Rev. 09/11
For the access to the TM-E-Modul valid IP address parameters are
necessary. The IP addresses are assigned by the network administrator.
Per default the TM-E module is delivered with the IP address 10.0.0.53.
You may switch to the IP address parameter wizard with "Set IP address".
By clicking to [Browse...] each TM-E module of the network is listed.
•
Choose the TM-E module, which corresponds to the serial number.
Confirm your input and click to [Continue >].
•
The dialog window to enter IP address data is opened.
•
Enter the new IP address parameters. By clicking to [Continue >] the
new IP address parameters are transferred to the TM-E module.
→ The
TM-E module is started new. After a certain waiting period and during
successful transmissions this is reported.
•
[Finish >] closes the dialog.
With each new dial-in of the TM-E module, this is assigned automatically
with a new IP address. This is called dynamic address allocation.
Usually the TM-E module sends an eMail containing the current valid IP
address. By this IP address the TM-E module may be accessed.
With the service of a DNS service provider like e.g. www.no-ip.com there is
the possibility to directly access the TM-E module by a name instead by the
IP address.
Here usually a free user account is to be established.
The corresponding DNS service provider may be selected on the Web
page of the TM-E module at "Networking config" with the page "Publish IP
address". Here the user data may be entered.
During communication the dynamic IP address is submitted to the service
provider and there transformed to the symbolic name.
Changing the IP
address
Symbolic name
instead of
IP address