VIPA TM-E 900-1E630, Руководство пользователя

Страница: 49 / 68

Manual VIPA TM-E
Chapter 3 Deployment
HB39E - TME - RE_900-1E630 - Rev. 09/11 3-23
Depending on the access modes to your TM-E, there are the following
possibilities to preset IP address parameters:
Access via Ethernet
Enter here IP address and subnet mask of your TM-E module. The IP
address parameters must correspond to the IP address parameters, which
were preset with the software tool "eBuddy".
Access via PPP connection
If you want to access your TM-E module via dial connection (PPP
connection), the following preset IP address parameters are to be used:
IP address: 202.0.0.240
Subnet mask: 255.255.255.0
Open the properties dialog of the communication component "MPI/DP" of
"TM-E". Enter the MPI address. This must correspond to the MPI address
preset by the software tool "eBuddy".
NetPro should now show the following structure.
Click in the graphical net view at the CPU and transfer your project with
Download
>
Selected stations
.
Now your CPU may be accessed via this connection from the Siemens
SIMATIC manager.
Define access via
IP address
Set the MPI
address
Transfer the
project to the CPU