VIPA TD 03, Руководство пользователя

Страница: 33 / 54

Manual VIPA HMI Chapter 2 Deployment TD 03
HB116E - TD03 - Rev. 07/50 2-17
Operating the TD 03 - Overview
The TD 03 should be connected to the CPU with the delivered cable (order
no.: 670-0KB00). As soon as the power supply of the CPU is switched on,
the TD 03 is provided via MPI by DC 24V and starts automatically.
The TD 03 has the following operating modes:
•
Display mode
•
Menu mode
After the start, the TD 03 is in display mode. The display mode is the
standard operating mode of the TD 03. Here you may switch between the
activated messages respectively acknowledge them and alter process
values.
By pushing the key in the display mode, you reach the menu mode .
If you don't touch another key within 1 min., the panel switches
automatically back to display mode. In display mode the cursor (entry sign)
faded out. It appears by pushing res. .
To navigate through the menu, the following keys are available:
res. jumps to the previous res. next menu entry. opens
the according menu entry. If this menu entry is a variable, you reach the
changing mode with . This is shown by the blinking of the variable.
Now you can change the value with and and confirm with
or break off with .
Pushing one of the function keys ... , a bit is set into a bit
memory byte in your CPU. By requesting the bit memory byte in your PLC
program, you are able to react to the entry.
By evaluating the bit memory byte within the PLC program, it may be
reacted to an input.
The behavior of the function keys may be selected by the parameter
F-keys mode
within the Menu mode .
Push additionally to a function key to call F5 ... F8.
Turn on
Operating modes
Display mode
Menu mode
Operation via
keyboard
Usage of the
function keys