Vip2 VK2-1080VRD3V9 Скачать руководство пользователя

Страница: 68 / 77

VK2-1080VRD(IR)3V9(F) manual V1.0

6) Maintenance

• Maintenance Server

Restart:

The unit is restarted without changing any of the settings. Use this method if

the unit is not behaving as expected.

Restore:

The unit is restarted and most current settings are reset to factory default values.

The settings that are not affected are:

* the boot protocol (DHCP or static)

* the static IP address

* the default router

* the subnet mask

* the system time

Default:

The default button should be used with caution. Pressing this will return all of the

Network Camera's settings to the factory default values (including the IP address).

• Update Server

Carry out the upgrade by importing an upgrade file and pressing the Upgrade button. During the
upgrade, do not turn off the power of the Network Camera. And try an access again after waiting
five minutes or longer.

• Backup

Save a setting value that users enter to the Network Camera, to a user PC.

Содержание VK2-1080VRD3V9














































































Результаты поиска

Содержание VK2-1080VRD3V9

Отзывы:

Похожие инструкции для VK2-1080VRD3V9

Бренды по названию

Популярные бренды

Vip2 VK2-1080VRD3V9, Инструкция по установке и эксплуатации

Результаты поиска

Содержание VK2-1080VRD3V9

Отзывы:

Похожие инструкции для VK2-1080VRD3V9

Бренды по названию

Популярные бренды