Vip2 VK2-1080VRD3V9, Инструкция по установке и эксплуатации

Страница: 64 / 77

VK2-1080VRD(IR)3V9(F) manual V1.0
64
• Auto Traffic Control
Set a limitation on user network resources by designating the maximum bandwidth.
- Maximum bandwidth - In case of sharing other network programs or equipment, it is
possible to set a limitation on the maximum bandwidth in the unit of Mbit/s or kbit/s.
- Auto frame rate - Selected if not influenced by a network-related program or equipment
without a limitation on the network bandwidth.

NAT Traversal
A broadband router allows devices on a private network (LAN) to share a single connection to the
Internet. Thi
s is done by forwarding network traffic from the private network to the “outside”, that is, the
Internet. Security on the private network (LAN) is increased since most broadband routers are pre-
configured to stop attempts to access the private network (LAN) from the public network/Internet.
Use
NAT traversal when your network cameras are located on an intranet (LAN) and you wish to
make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured,
all HTTP traffic to an external HTTP port in the NAT router is forwarded to the network camera.
Notes:
-
For NAT traversal to work, this must be supported by the broadband router.
- The broadband router has many different names:
“NAT router”, “Network router“, Internet Gateway”, “Broadband sharing device” or “Home firewall”
but the essential purpose of the device is the same.