VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
14
1.
On the Indoor Monitor, press and hold
the “Settings” button for 6 seconds, then
enter the password for the Network
Settings (
888888
by default).
2. Select "Wireless IP"
, set "DHCP" to "On"
and
confirm with "OK".
3.
Select “WLAN”, and set it to “ON”.
4.
Select the Access Point you wish to
connect to. In this example, we are going
to connect to “MyAP”.
5.
When prompted, enter the password for
the Access Point, then select “OK”.
6.
After 30 seconds, your Door Station will
connect to the Access Point.
2.3.2
Indoor Monitor Configuration
