Viotek GN32DA, Руководство пользователя

Страница: 6 / 20

6
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package and take out the product with foam still attached. Gently place it on a
desktop or table.
2. Take out the cable clip, stand stem and stand base. Remove the foam covering the bottom
of the monitor. Slide the cable clip down on the back of the stand stem to attach it to the
stand stem. Use the NO. 1 screw to fasten the Stand Base to the Stand Stem.
NO. 1 Screw x 1
Stand Base
Stand Stem
Cable Clip
3. Press the button to remove the stand plate, and use two NO. 2 screws to install the it onto
the stand stem.
Stand Plate
NO.2 Screws
x 2
Button
4. Insert the stand’s plate into the opening on the back of the monitor. It should click
into place. Make sure the stand is securely attached to the back of the monitor before
removing the monitor from the remaining foam and stand it up on a secured, level table or
desk.
The stand can easily be detached from the monitor by pressing the button near the stand
plate. Make sure the monitor is laid on a flat surface before removing the stem.
Button