Viotek GN32DA, Руководство пользователя

Страница: 10 / 20

10
Section 7: Basic Operation
1. Insert one end of the DP cable into your PC’s graphics card. Other connection types may
be used. Additional cables not included.
For optimal refresh rate (or “performance”), it is recommended to use a DisplayPort
(DP) or DVI-D dual link cable with the monitor’s corresponding connector.
2. Connect the other end of the cable to the corresponding connector on your monitor. See
the image below.
Audio Output
DP Connector
HDMI Connector
DVI Connector
3. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if a wall
outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
AMD FreeSync
This feature itself is off by default. In order to use this feature, please note you must have
hardware with FreeSync capability, a DP cable, and the latest graphic drivers. To use this
feature, connect your computer and monitor with a DP cable. After connecting, you may
receive a prompt to enable the feature on your computer. If you do not receive the prompt,
you may need to enable the function in your graphics card menu. See your graphics card
manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.
Section 8: Indicator Light
Indicator Light
Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light
indicates no video source
,
no horizontal or vertical signal has been detected or power is low.
Please ensure your computer is on and all video cables are fully inserted and/or connected.