AC INLET
240V~50Hz 30W TIA 250V
7
Connecting to Audio-Visual Components
If you have a LD player, DVD player or CD player with a digital output, you can make use of an
optical digital cable (not supplied) or coaxial digital cable (not supplied) to carry the audio portion
of the signal and enjoy Dolby Digital sound quality.
One optical or coaxial cable is needed for each LD player, DVD player or CD player. This
receiver provides one optical, one coaxial and one XLR digital input for the connection of your
components. Please connect your components (e.g. LD, DVD, or CD) to the appropriate digital
inputs and press INPUT button to select your connection.
Note:
Optical and coax cables carry only the audio portion of the signal. A separate video connection
must also be established for a LD player and DVD player. S-video provides the best connection
for the video portion of the signal. Composite video (yellow RCA connector) can also be used. It is
important to use the same connection type (S-video or composite) to connect the LD or DVD
player to the ADP-61 and then from the ADP-61 to the TV, LCD or Plasma display.
199
Connect components
capable of outputting Dolby
Digital (e.g. DVD or LD) or
standard PCM(CD) format
digital signals. Read section
on "Digital Connections"
under "Getting Started".
CD Player
Digital Workstation
Tape Deck
VCR
DVD
LD
TV
AUDIO
OUT
Balanced
To
AUDIO
OUT
(DVD
)
To
VIDEO
OUT
(DVD)
To
S-VIDEO
OUT
(DVD)
To VIDEO OUT (VIDEO)
To AUDIO OUT(VIDEO)
To S-VIDEO OUT (VIDEO)
To AUDIO OUT(VCR)
To VIDEO OUT (VCR)
To S-VIDEO OUT (VCR)
To VIDEO IN (TV)
To AUDIO OUT (TV)
To S-VIDEO IN (TV)
Unit
Rear Panel
If your CD or DVD player is equipped with digital output jacks, you can enjoy superior sound quality
by making use of them.
S/PDIF Digital connections are possible via either a TOSLINK optical or a 75ohm co-axial cable with
RCA connectors. For a AES/EBU connection, a 105ohm digital XLR cable is required.
Once connected, simply select either Coax-1, Coax-2 or OPTICAL input for each connection.
Note: This receiver only has one of each digital input type. You may have to use the optical for one unit,
while using the co-axial connection for another.
Also note: Digital cable quality will affect performance. To minimize jitter and other artifacts, only use
good quality, well shielded digital cables.
If your video component has a S-Video output connection,
you can enjoy enhanced video quality by connecting it to
one of the S-Video input sockets on the rear panel of the
ADP-61.
One video cable is needed for each component.
Note: Before plugging in any optical or S-Video cable, make
sure the shape or pin configuration of the plug and socket
match. Be careful not to apply excessive force when making
a connection!
25-pin D-Sub connection for 6 analog channels
i.e. Digidesign, Tascam, Mackie etc.
(+4db balanced) For details see p.29
m e n u
m e n u
Getting Started ADP61
Multi -form at player/
Extern al decoder
DIGITAL AUDIO
WORKSTATION
MIXING CONSOLE
