Here you can adjust the level of each speaker with the built-in
test tone so that the volume of each speaker is the same at
the listening position.
Operating Your ADP61
Speaker Level Calibration
(Front Left channel)
(Front Center channel)
(Front Right channel)
(Surround left channel)
(Surround center channel )
(Surround right channel)
(Subwoofer channel)
TUNED
CD
AUX
TUNER
VIDEO
TV
VCR
DVD
6CH
MEMORY
TUNED
CD
AUX
TUNER
VIDEO
TV
VCR
DVD
6CH
MEMORY
2.Use the
panel
on the remote to select the speaker you want to
adjust.
Turn the ADJUST knob on the panel or u
or buttons on the remote
MENU button on the
or the Left and Right
or buttons
se the Up and Down
to set the volume.The volume
can be adjusted from -10 to +10 dB in 1 dB steps.
1.Press the TEST button on the remote control or panel, you
will hear a test tone (like pink noise) from front left speaker,
then front center speaker, then front right speaker, then surro-
und right speaker, surround center, then surround left speaker,
and then the subwoofer speaker.
The speakers cannot be calibrated while the output of this unit
is muted, or when using the multichannel input.
Note:
3.Repeat step 2 until the volume of the test tone from each
speaker is the same.
4.After adjustment, press TEST again on the remote control or
panel to exit testing mode.
Front Panel
Remote Control
Front Panel
Remote Control
24
MENU
TEST
MENU
TEST
DSP
DSP
