Operating Your
ADP61
Remote Control Function
1. I
selector section
2.
3. Numerical keypad (from 1-8)
Press these buttons to select preset tuning channel.
4. Tuning scan buttons
5.
6. TEST
Activates Pink Noise
test tones to each output sequentially.
7. S
8. DTS & DTS ES mode selection button
9.DTS Neo:6 Cinema/Music mode selection button
10. POWER
Alternates between Power On and Standby Mode.
For this button to function, first make sure the POWER
switch is depressed on the ADP-61’s main panel and
that the red standby light is on.
11.A/B/C/D
nput
Selects the input source you want to listen to or watch.
TUNER automatically tuning button
Hold down the button for more than 3 seconds to start automa-
tic preset tuning (AM/FM is detached).
Press the SCAN+ side to tune in to a higher Frequency.
Press the SCAN- side to tune in to a lower frequency. Press
and hold for two seconds to scan automatically.
Master volume
ET MAIN MENU button
Press these buttons to turn the unit into the SET MAIN
MENU mode.
Scroll to the desired parameter by using the L or R buttons,
then press the + or - buttons to adjust value.
Note:
Input sources must be DTS or DTS ES
Controls the level of all seven XLR output channels.
-encoded.
Selects one of the 4 preset station groups (A to D), when
the unit is in tuner mode.
12. Stores a station in the memory
13. MUTE
Mutes the sound. Press again to restore the audio out to the
previous volume level.
14. DSP mode selection button
Eight
DSP modes: Live, Cinema, Disco, Stadium, Jazz,
Church, Hall, and ProLogic.
15. Dolby Digital & Dolby Digital Surround EX mode
selection button
Note:
16. 2 channels stereo mode & 6 channels stereo
mode selection button
17. Dolby Pro logic II Movie/Music mode selection
button
18. SLEEP button
Sets the sleep time:10min,20min,30min,40min, 50min,60min,
70min,80min,90min,100min,110min,120min.
Input sources must be Dolby digital or Dolby Digital Surround
EX-encoded.
14
