Operating the Tuner
The receiver has a built-in tuner that allows for AM/FM radio
function.
Manual tuning
1.Connect the FM and AM antennae accordingly (see page 9
"Connecting the Antenna" ).
2. Press the POWER swtich to turn on the receiver.
3. Press the TUNER button on the remote or INPUT buttons on
front panel to select TUNER as the input source.
6. Repeat steps 5 to tune another radio station.
7.Select sound effect if needed by pressing preset DSP sound
or other available listen modes,
NOTES
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away of them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
DSP
Front Panel
Remote Control
Front Panel
Remote Control
Front Panel
Remote Control
Remote Control
Front Panel
Remote Control
TUNED
CD
AUX
TUNER
VIDEO
TV
VCR
DVD
6CH
MEMORY
5.Tune by pressing SCAN + or SCAN - repeatedly until the
desired station is found. Alternatively, you can press and hold
SCAN + or SCAN - for about one second to activate the auto-
matic search function.In this mode, the receiver will automatic-
ally tune frequencies until it finds a station.When a FM station
broadcast stereo sound, the STEREO
up.
indicator lights
4.Press the FM/AM button on the front or the remote control to
select the reception band.
There are 2 way to tune; automatic and manual. Automatic
tuning is effective when broadcast signals are sufficiently
strong and free from interference. If a radio signal is weak,
manual tuning is recommended.
27
MENU
TEST
TUNER AUTO
1~8
FM/AM
A/B/C/D
DSP
TUNER AUTO
1~8
FM/AM
A/B/C/D
DSP
TUNER AUTO
1~8
FM/AM
A/B/C/D
DSP
Operating Your ADP61
