POV.HD User Manual
Using the Recorder
13
See
Understanding the POV.HD Record Methods
for additional information about how the POV.HD
determines how much video to save in order to ensure that you capture the action immediately before and
immediately after each tag.
To set the
Record Method
, use the
Settings
menu.
Record using the wireless remote
The POV.HD allows you to control recording and set tags on a video clip without accessing the recorder. This
allows you to stow the recorder in an out-‐of-‐the way place while recording. It also allows you to place the
recorder and camera head up to 15 feet from where you are.
The wireless remote operates on any one of 10 frequency channels which allows multiple POV.HD’s and POV.1
series devices to operate in the same vicinity without interfering with each other.
The wireless remote comes set for channel 0 and the recorder is set to receive channel 0 as well. Unless you
need to operate in the vicinity of other POV systems, there is no reason why this needs to be changed. If you
do need to change the wireless remote communication channel, refer to
Changing the Remote ID Channel
.
Record still photos
1.
In
Settings
, change the
Record Method
to
Still Photo
.
2.
Press the
REC
button on the recorder. As for any other
Record Method
,
Standby
will be displayed in
the upper left, and “Still Photo” will be displayed in the top center of the LCD. The LCD will show the
through-‐the-‐camera preview.
3.
To capture a still photo, press either the
REC
button or the
Save
soft key. “Still Photo” will appear
briefly in place of “Standby”, and the captured still photo will be displayed on the LCD for
approximately 1 second.
4.
When the recorder is in
Still Photo Standby
, you can capture still photos using the wireless remote as
well. Every time you press
REC
on the recorder or
REC/TAG
on the remote another still photo is
captured.
When you set the
Record Method
to Still Photo, it remains in Still Photo until
you change it using the Settings menu. If you power down, the recorder will be
in Still Photo Standby when it is powered up. If you leave Record mode, the
recorder will return to Still Photo Standby when you press the REC button.
i
