vio-pov POV.HD, Руководство пользователя

Страница: 15 / 47

POV.HD User Manual
Using the Recorder
12
Record video
The basics
1. When the POV.HD boots up, it goes to Record Standby automatically. If you have been reviewing clips,
using settings or for some other reason are not in Record Standby, push
REC once to get to Record
Standby.
The LCD will show a preview of whatever is being captured by the camera head, with this overlay.
Standby indicates that the recorder is in Record Standby mode.
Clip indicates that the Clip Record Method will be used for recording.
See
Record Methods
below for more information about available
Record Methods .
49 min
is the estimated recording time remaining on the SDHC card
Keylock is used to lock the keypad. See
Keylock
above for more
information.
2. To begin recording, press the REC button on the recorder.
The LCD will show the video being recorded.
The
Record Method being used for this recording is indicated in red in
the upper left. The Clip method is being used in this example. See
Record Methods
below for more information.
The upper right indicates the elapsed time of the recording.
The
Tag soft key, indicated by the label in the bottom center, allows
you to add a tag to the clip being recorded.
3. To tag the clip being recorded, press the Tag soft key.
A tag is a time marker on a clip, similar to a bookmark in a document. Tags are added to a clip by
pressing the
Tag soft key on the recorder, or the REC/TAG button on the wireless remote. Tags are
used by the built-­‐in editing software. See
In-­‐field Editing
, below for more information.
Record methods
The POV.HD supports 4 Record Methods . A complete discussion of what each Record Method does as well as
guidelines for selecting the right Record Method is provided in
Understanding the POV.HD Video Record
Methods
, below
.
Clip records video like a standard video recorder. Once you start recording, video is captured continuously
until you stop recording or the SDHC card is full.
Loop records a short clip every time you press TAG (or REC/TAG on the remote). The saved clip, referred
to as a loop, includes action immediately before you press TAG , as well as action immediately following.
Loop & Forward records no video until you press TAG (or REC/TAG on the remote) for the first time. Then
a loop is captured and all action following that first tag is captured as well.
Still Photo captures digital photos as JPEG's.
To set the Record Method , use the Settings menu.
When you use the Loop or Loop & Forward methods, Loop Record Time determines the length of the saved
video loops. The actual length of a saved loop is never less than the Loop Record Time , but it can be longer.
Standby
Clip 00:49:00
Keylock
Clip
00:01:37
Tag