Operators guide
15
0QFSBUJOHUIFQBOBOEUJMUESBH
Both the pan and tilt mechanisms incorporate the Vinten LF system to ensure smooth movement
of the camera about these axes. The tilt drag adjustment knob (5) is located on the right-hand
side of the head and the pan drag adjustment knob (13) is located at the back of the head,
beneath the platform (9).
Both drag adjustment knobs are provided with graduated scales. To increase drag, turn the knob
towards a higher graduation. To decrease drag, turn the knob towards a lower graduation.
NOTE: The whip-pan facility is not affected by the pan drag setting.
CAUTION!
Reduce drag to a minimum when the head is out of use for long periods,
to minimize wear on drag components.