10
Mounting the camera (optional Quickfit adaptor)
If not already attached, secure the Quickfit Adaptor (18) to the slide plate (9) with the two screws
(15) provided.
Free the Quickfit wedge (17) from the adaptor by simultaneously pushing in on the safety catch
(20) and operating the wedge release (19).
Fit the Quickfit wedge to the camera with the two screws (16) provided.
Insert the forward end of the wedge into the forward end of the adaptor. Lower the rear of the
wedge into the adaptor until an audible click indicates that the wedge is locked in position.
Balance the head (see
Balancing the head
).
Mounting the camera (VHS adaptor)
(9)
(21)
(10)
(15)
(8)