23
www.vintageair.com
905701 REV B 09/18/18, PG 23 OF 34
Wiring Installation (Cont.)
12.
13.
14.
15.
16.
Connect the blue wire from the main wiring harness to the safety switch on the drier (See Photo 12, below).
Connect the compressor lead to the compressor, and route the other end to the safety switch on the drier
(See Photo 13, below).
Reinstall the battery tray using the OEM bolts (See Photo 14, below).
Install the circuit breaker near the battery (See Photo 15, below).
Reconnect the red wire eyelet from the main wiring harness to the circuit breaker (See Photo 16, below).
Photo 12
Photo 13
Photo 14
Photo 15
Photo 16
Drier
Connect Blue Wire
from Main Wiring
Harness to Safety
Switch on Drier
Safety
Switch
Run Compressor
Lead to Compressor, Then
to Safety Switch on Drier
Reinstall
Battery Tray
Install Circuit
Breaker Near
Battery
Battery
Tray
Reconnect Red Wire
Eyelet from Main
Wire Harness to
Circuit Breaker
