9
901142 REV D 5/16/17, INST 63-66 CORVETTE EVAP wo AC PG 9 OF 25
FIREWALL COVER INSTALLATION
APPLY A 1/4” BEAD OF SILICONE AROUND THE BACK SIDE OF THE FIREWALL COVER AS SHOWN IN
FIGURE 5, BELOW.
FROM INSIDE THE CAR, INSTALL FIREWALL COVER ON FIREWALL USING (2) 1/4-20 x 1
¼”
HEX BOLTS AND
(2) FLAT WASHERS, SEE FIGURE 5, BELOW. (NOTE: USE SEAM SEALER TO FILL GAP BETWEEN COVER & LIP
IN FIREWALL BEFORE PAINTING.)
INSTALL 3/8 GROMMET IN FIREWALL COVER AS SHOWN BELOW.
FIGURE 5
(2) 1/4-20 x 1
¼”
HEX BOLTS
(2) 1/4 x 3/4
FLAT WASHER
GROMMET
33144-VUI
BACK SIDE
OF FIREWALL
COVER
SILICONE
FIREWALL
COVER
