Vingtor Stentofon ECPIR-3P, Техническое руководство

Страница: 57 / 80

57
Turbine Station Configuration Guide
A100K11194
Number (SIP ID)
- This is the identification of the station in the SIP domain, i.e. the phone number for the station.
This parameter is mandatory. Enter the SIP ID in integers according to the SIP account on the
SIP domain server.
Server Domain (SIP)
- This parameter is mandatory and specifies the primary domain for the station and is the IP
address for the SIP server (e.g. Asterisk or Cisco Call Manager). Enter the IP address in
regular dot notation, e.g. 10.6.201.10.
Backup Domain (SIP)
- This is the secondary (or fallback) domain. If the station loses connection to the primary SIP
domain, it will switch over to the secondary one. Enter the IP address in regular dot notation.
Backup Domain 2 (SIP)
- This is the tertiary SIP domain used as backup in case the primary and secondary domains
fail.
Registration Method
- Parallel : The station will register to the primary, secondary and tertiary SIP server domains at
the same time.
- Serial : The station will always try to register to the first available SIP server domain, starting
with the primary domain, followed by the secondary and the tertiary domains.
- Top-Down : This is the same as for Serial registration except that it will always revert to the
SIP domains with the higher priority if available. In decreasing order of priority, the primary SIP
domain has the highest priority, followed by the secondary domain and the tertiary domain.
- Cisco : This is for the Cisco environment only with Publisher/Subscriber/SRST setup, where
the station is normally registered to Publisher. The Subscriber should be assigned as the
secondary SIP domain, and SRST gateway as the tertiary domain.
Authentication User Name
- This is the authentication user name used to register the station to the SIP server. This is
required only if the SIP server requires authentication and is normally the same as the SIP ID.
Authentication Password
- The authentication user password used to register the station to the SIP server. This is
required only if the SIP server requires authentication
Register Interval
- This parameter specifies how often the station will register, and reregister in the SIP domain.
This parameter will affect the time it takes to detect that a connection to a SIP domain is lost.
- Enter the values in number of seconds from 60 to 999999. The default interval is 600 seconds.
Outbound Proxy [optional]
- Enter the IP address of the outbound proxy server in regular dot notation, e.g. 10.5.2.100
Port
- Enter the port number used for SIP on the outbound proxy server. The default port number is
5060.
Outbound Backup Proxy 1&2 [optional]
- Enter the IP address of the backup outbound proxy server in regular dot notation, e.g.
10.5.2.100
Outbound Transport
Possible configuration options:
UDP
,
TCP
,
TLS
. For TCP and TLS options, it is necessary to set
Outbound Proxy to have the same value as Server Domain.
SIP Scheme
Possible configuration options: sip , sips . Using sips forces all proxies to also use TLS.