Vincent
25
1. SR: Infrared receiver for the
remote control
2. CLASS A: amplifier circuitry mode
This button toggles between Class A and Class AB
modes. Helpful, if the warming of the unit during
better sounding Class A mode is to be avoided.
3. INPUT: Input Selector
This dial allows you to choose one of the six
inputs.
4. POWER
This is the main power switch for turning on and
off the device. The amplifier is separated from the
mains voltage in case it is not connected to
“Power Control Output“ (8). Otherwise please
every device which is connected to “Power
Control Output“ (8) switch off.
5. VOLUME: Volume dial
This is the knob for the adjustment of the main
volume level of the system.
6. SPEAKER A/B: loudspeaker switches
If suitable speakers are used, a second loudspea-
ker can be operated at the same time. This button
allows each of the speakers (designated A and B)
to be individually switched on and off. The LED
located above each of the buttons shows which of
the speakers is activated.
FRONT VIEW
3
5
1
2
4
6
