IT
22
7539 Tab Free
3
1
2
> 6s
beep
Configuration procedure ("Standard” Mode):
• Press and hold down the
key
• Press the
key too and hold them down until the
key starts flashing.
• Release the keys.
• Press and hold down the key to restore to the default configuration (
1 / 2 / 3 / 4
) until the indoor station beeps.
• Release the key and press the key again, the indoor station emits a signal to confirm that the operation has been successful.
Note: This procedure allows you to manually reconfigure the keys except for the
and
keys which require the SaveProg
software.
Procedure for restoring default data for each individual key (1 / 2 / 3 / 4 / )
Configuration procedure ("Simplified” Mode):
1. Press the key you want to reprogramme to its default value and hold it down for at least 6 s.
2. After 6 seconds the indoor station emits a "beep" (high tone).
3. Release the key you want to reset, then press it again to return it to its default setting.
The device emits a confirmation tone that the key has been reset
Alternative configuration procedure ("Simplified” Mode):
1. Press and hold down the key you wish to restore to the default value for 6 sec; after 6 seconds, the indoor station emits a "beep".
2. Continue holding down the key for another 3 sec; the device emits two “beeps".
3. Continue holding down the key for a further 3 sec; the device emits a long tone to indicate that the key has been reset; when the
key is released, the device emits another tone.
5
1
4
> 6s
beep
2
+ 3s
2 x beep
3
beep
+ 3s
beep
